Who is Civil Safety Engineer? (Q/A Interview Preparation)

Let's first know who is Civil Safety Engineer and then we will understand the roles and responsibilities and later we will discuss the Q/A Interview Preparation for Civil Safety Engineer.


Who is Civil Safety Engineer?

Civil Safety Engineer provides precise details on how workers will interact with equipment and building designs during construction. Ideally, administrative controls and the use of personal protective equipment act as barriers between construction workers and hazards.

What are the roles and responsibilities of a Civil Safety Engineer? 

  • A Civil Safety Engineer develops policies to ensure safety of environment, its customers and employees.
  • They inspect equipment, environments and buildings to identify areas that can potentially cause health and safety hazards.
  • They independently inspects construction projects to maintain safety standards (e.g., floor loading capacity test, safety measures on storage tanks containing flammable and volatile liquids, and checking scaffolding to do painting of buildings)
  • They finish hazard and job safety analysis to make sure proper use of machinery and equipment, personal protective equipment, and procedures

What qualification does a Civil Safety Engineer  require? 

  • A Health and safety engineers must have a bachelor's degree in an engineering discipline. & Employers value practical experience, cooperative-education engineering programs at universities are valuable as well.


Following are the Basic Questions to be asked to a Civil Safety Engineer in interview? 

What type of protection is a must for everyone on a construction site? 

 : A safety helmet of high quality (hard outer shell made from resin/fiber composite, such as  fiberglass, or carbon fiber or a molded thermoplastic or polycarbonate. Inner shell is generally energy  absorbing expanded polystyrene material.


What is the minimum age at which a person can obtain CSCS card so that he may drive a dumper on a building site? 

: 18 years.


Under the construction regulations what height should guard rail be on scaffolds? 

 : Not greater than 1m and not less than 0.95m.


What Key Ground Characteristics Should Scaffold Erectors Look For Before Erecting the Scaffold?? 

: They should look out for basements, drains or patches of soft ground which could give way when loads are placed upon them.


 What is the minimum acceptable height of a toe board? 

 : 6 inches or 150mm.


What is the maximum operating voltage for temporary lighting in building under construction? 

: 110 volts.


 What is Safety Policy?

 : Any company has a social and legal obligation to provide a safe and health working environment to all his improvement to all his employees.


What do you understand by Safety Tag

: The Safety tag can be defined as a surface made of card board or paper board on which English local languages letters written for warning safety instructions to employees..


 What is Accident? 

 : It is an unexpected or unplanned event which may or may not result in injury or damage or property loss or death.


Explain What is safety audit? 

: The safety audit is the process that identifies unsafe conditions and unsafe acts the plant and recommended safety improvement . Walk through It evaluates the unsafe condition notice able to naked eye during work through the plant. (Stores, civil work, erection work) Intermediate more details study and review of plant design and plant operation. Comprehensive It evaluates the safety factors in the plant on the base engineering, analysis, testing, measurement.


Explain Control measure of work at height?

 :  Use safety belt with proper anchoring above head. 

      Special training must be given before starting the job. 

      All scaffolds must be erected by skill persons. 

      No work after sunset.

      Every platform should free from unnecessary obstruction.

      Grease mud paint removed from working platform.


Explain What is safety audit? 

: The safety audit is the process that identifies unsafe conditions and unsafe acts the plant and recommended safety improvement . Walk through It evaluates the unsafe condition notice able to naked eye during work through the plant. (Stores, civil work, erection work) Intermediate more details study and review of plant design and plant operation. Comprehensive It evaluates the safety factors in the plant on the base engineering, analysis, testing, measurement.


Explain what is tool box talk? 

 :  Job related safety aspects. 

       Job related hazards. 

       Control prevention measures. 

       Adequacy of PPE's

       Following safety rules / procedures.

       Safe work procedures / methods.



 What is the safe pass? 

 : Safe pass is a safety awareness training programme for construction workers. It is a one-day programme that allows them to work on Construction sites without being a risk into themselves or others. Employers are required by law to ensure that employees on construction sites carry safe pass cards.


civil guruji

CIVIL ENGINEERS TRAINING INSTITUTE

Welcome to the endless world of Civil Engineers!

To achieve your dreams we best support you to choose your path with the practical learning Atmosphere to provide real service to nation, for more details you can visit our website or get connect us with "Civil Guruji" app , you can contact us on +91-9111001234

call now

CIVILGURUJI

CIVIL ENGINEERS TRAINING INSTITUTE

 Corporate Office, Civil Guruji Nehru Nagar East, Bhilai, Dist – Durg, Chhattisgarh, India. Pincode- 490020 

  Phone: +91-9111001234 Email: hr@civilguruji.com

Follow me on Graphy
Watch my streams on Graphy App
Civil Guruji 2023 Privacy policy Terms of use Contact us Refund policy